Call Waiting Tone - Mitel 6863i Administrator's Manual

Operational Features

CALL WAITING TONE

You can also enable or disable the playing of a short "call waiting tone" when there is an incoming
call on your phone using the "play call waiting tone" parameter. This feature is enabled by
default. If you have Call Waiting enabled, and a call comes into the line for which you are on
an active call, a tone is audible to notify you of that incoming call.
Note: The Call Waiting Tone feature works only if Call Waiting is enabled.
A User or Administrator can configure this feature using the Mitel Web UI. An Administrator
can also configure this feature using the configuration files.
Configuring Call Waiting Tone
Use the following procedures to configure the Call Waiting Tone feature on the IP phone.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Call
on .
Waiting Settings" page A-71
MITEL WEB UI
1. Click on Basic Settings-> Preferences->General.
5-67