Headset Mode - Mitel 7434 User Manual

1.11
6/1553-DBC 434 01 Uen G1 2016-03-08
Switch from handsfree 
to headset
Switch from headset 
to handsfree

HEADSET MODE

Using a headset allows you to make and receive calls without using the handset.
Plug the headset cable to the connector marked
If you are using a wireless headset, plug the radio base cable to the connector marked
.
Answer a call
Make a call
Switch from headset 
to handset
Switch from handset 
to headset
Clear a call
Change volume
By default, the phone is set to connect calls to the loudspeaker. If you are using a
headset, you can switch to the headset preset mode to have calls connected to the
headset instead.
Activate Headset Preset
Deactivating Headset Preset
Mode
Note: When you lift the handset, the call is always connected to the handset, regard-
less of the type of preset setting. Activation and deactivation of Headset Preset
can only be done when the phone is in idle mode.
Note: When headset preset mode is used and when automatic answer is used, it is
possible to announce a new call by a special tone in the headset.
Press .
Press .
, and the headset is ready to use.
Press .
Press and dial the desired number. In headset
preset mode, you are not required to press the headset
key.
Lift the handset.
Press and replace the handset.
Press the Clear softkey or
Press to change the volume.
The new volume setting is stored.
Press and hold for at least 4 seconds.
A short acknowledgement signal is heard.
Press and hold for at least 4 seconds.
A short acknowledgement signal is heard.
M 7434 D
ITEL ESCRIPTION
.
20