Lucent Technologies TransTalk 9000 Installation And Use Manual page 83

Handset
Attaching the Metal
Carrying Clips
Attaching the Plastic
Clips
76
To attach the metal carrying clip to the battery pack, do the following:
1 Remove the battery pack from the handset, as described in "Inserting and
Removing the Handset's Battery Pack" in Chapter 2.
Extended Spare
Battery Pack
Place the two metal tabs on the clip into the slots on the battery pack, with the
2
"hooks" toward the bottom of the battery pack.
Slide the clip toward the bottom of the battery pack to engage the hooks.
3
Reinsert the battery pack in the handset, as described in "Inserting and Removing
4
the Handset's Battery Pack" in Chapter 2.
To attach the plastic clips to the battery pack, do the following:
1 Remove the battery pack from the handset, as described in "Inserting and
Removing the Handset's Battery Pack" in Chapter 2.
2 Hold the battery pack so that the back of the battery pack is facing you.
Hold the carrying clip so that it looks like the letter " T."
3
3
Using the MDW 9031/9031DCP
Standard Spare
Battery Pack
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
Pocket Phone
503-801-166 — Issue 3 — October 1999