Lucent Technologies TransTalk 9000 Installation And Use Manual page 32

Understanding Carriers
Setting the 117A3
Carrier
Control/Expansion DIP
Switch
Control/Expansion
DIP Switch
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 — Issue 3 — October 1999
The Model 117A3 carrier can serve as either a control or an expansion carrier.
Whether you install one or more 117A3 carriers, you must set the Control/Expansion
DIP switch in Slot 4 of each 117A3 carrier to indicate which role that carrier is filling.
1
The leftmost carrier, no matter what model number it is, must be the control carrier,
and the remaining carriers are expansion carriers. The control carrier acts as the
"lead" carrier—its transmit and receive patterns control the expansion carriers,
ensuring that all of the linked carriers function as a single system.
It is recommended that you determine which carrier is to be the control carrier and
which, if any, will be expansion carriers; then set the Control/Expansion DIP
switch(es) before mounting the carrier(s) on the wall.
2
Installing the MDW 9031/9031DCP
2 3
Pocket Phone
4 5
Slot 4
25