Lucent Technologies TransTalk 9000 Installation And Use Manual page 133

MDW 9031 Compatibility
126
To program the Ringing Option feature, use the "triangle" and "rectangle"
•
indicators in the display as the equivalent of red and green LEDs, respectively.
• For MERLIN II System users, if you program an Auto Intercom button, idle line
preference must be set to intercom.
• If any of your incoming lines has the call waiting feature, use the Recall feature
(letter "C" in the display) and press it before you pick up a waiting call. You can
dial #50 before you pick up a waiting call on the following: MERLIN
206/410/820 Systems only with Feature Package 2, and all MERLIN Plus,
MERLIN II, and MERLIN 1030/3070 Systems. Pressing the O button
disconnects the call.
The / button on the MDW 9031 allows you only to enter programming
•
mode. It does not work when using MERLIN LEGEND System features. To use
MERLIN LEGEND System feature codes with this phone, program any available
button as a System Feature button. This enables you to use the wide array of
MERLIN LEGEND System features by turning the set on, pressing the System
Feature button, and dialing the appropriate " * " code number.
Note:
MERLIN LEGEND does not support Caller ID and some other Display
features to Analog/Hybrid terminals, such as the MDW 9031.
6
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 — Issue 3 — October 1999
MDW 9031/9031DCP Pocket
Phone Compatibility