Lucent Technologies TransTalk 9000 Installation And Use Manual page 141

MDW 9031 Compatibility
Setting the Line
Ringing Options for
System 25, System 75,
System 85, and
DEFINITY Systems
Telephone Communications
System
System 25
System 75
System 85
DEFINITY Systems
134
If your users do not need these features, assign them to "nonappearing" MDW 9031
Pocket Phone buttons; the buttons represented by the numbers 1 through 8 on the
Pocket Phone display can then be used for features the users want. The Scroll and
Display features shown on Page 4 of the STATION Administration screens are
assigned to buttons 11 and 12 (which cannot be accessed from MDW 9031 Pocket
Phones).
Use the following guidelines to ensure optimal voice quality when using MDW 9031
Pocket Phones with System 25, System 75, System 85, and DEFINITY Systems:
TransTalk 9000 System with Two Carriers (One
1
2
Note: For System 25, System 75, System 85, and DEFINITY Systems that use
pooled lines, set the Line Ringing options as described in the above table
if more than six MDW 9031 Pocket Phone handsets have the same
pooled line appearance.
Control and One to Four Expansion Carriers)
When TransTalk handsets are configured as individual
PBX extensions, no Line Ringing options are
necessary.
When TransTalk handsets are configured in pooled
PBX or group PBX extensions (for example, Splits or
Skills), where all incoming calls ring all handsets at
the same time, refer to "Setting the Line Ringing
Options for PARTNER Systems" earlier in this
chapter.
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
6
MDW 9031/9031DCP Pocket
Phone Compatibility
503-801-166 — Issue 3 — October 1999