Lucent Technologies TransTalk 9000 Installation And Use Manual page 25

Installing a Single Radio Module
18
Detach the rubber feet from the shipping card. Apply them to marked areas on the
3
underside of the radio module.
Place the wall-mounting plate against the wall. Choose a location backed by a
4
wooden stud (if unavailable, use toggle bolts instead of the supplied wood
screws). Lightly tap a nail into the wall to start holes. Then screw the plate flush
to the wall. Place the radio module over the plate, then slide it downward to lock
it into place.
Note: Do not remove the plastic cap covering the radio module's card edge.
2
Installing the MDW 9031/9031DCP
Screw
Holes
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
Pocket Phone
503-801-166 — Issue 3 — October 1999