Lucent Technologies TransTalk 9000 Installation And Use Manual page 33

Understanding Carriers
26
Use a nonmetallic, pointed object to set each 117A3 carrier's DIP switch according to
the following table.
Note:
Only one carrier (the leftmost carrier) can be the control carrier; the other
carriers must be expansion carriers.
To designate the carrier as a...
control carrier (one carrier only)
expansion carrier (one or more
additional carriers)
Go to one of the following:
If you are installing a single 117A3 carrier, go to
•
"Installing a Single Carrier."
If you are installing multiple 117A3 carriers, go to
•
"Installing Multiple Carriers."
If you are also installing one or more 117A4 carriers, go to
•
"Understanding Your Model 117A4 Carrier."
2
Installing the MDW 9031/9031DCP
Use this setting for the DIP switch...
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 — Issue 3 — October 1999
Pocket Phone