Lucent Technologies TransTalk 9000 Installation And Use Manual page 44

Installing a Single Carrier
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 — Issue 3 — October 1999
Remove the plastic cap covering each radio module
4
the radio modules into the carrier.
Starting from the leftmost slot (#1), insert each radio module into the carrier by
5
hooking it onto the radio module mounting rod. Slowly swing the radio module's
card edge into the card edge connector on the back of the carrier.
When the card edge is fully seated, a snap lock on the bottom of the radio module
6
will engage.
2
Installing the MDW 9031/9031DCP
'
s card edge before inserting
Pocket Phone
37