Lucent Technologies TransTalk 9000 Installation And Use Manual page 103

Removing Radio Module from Carrier
96
Unplug the telephone line cord from the bottom of the radio module.
2
Press up and hold the snap lock on the bottom rear of the radio module.
3
Slowly swing the radio module's card edge out of the card edge connector on the
4
back of the carrier, releasing the snap lock when clear. Unhook the radio module
from the radio module mounting rod by gently lifting upward.
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 — Issue 3 — October 1999
4
Maintaining the MDW
9031/9031DCP Pocket Phone