Lucent Technologies TransTalk 9000 Installation And Use Manual page 62

Installing Multiple Carriers
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 — Issue 3 — October 1999
When the card edge is fully seated, a snap lock on the bottom of the radio module
4
will engage.
Repeat Steps 3 and 4 for each expansion carrier, until each radio module is
5
inserted into a carrier.
Note:
Fill all six slots of the current carrier before inserting radio modules into
the next carrier.
6 Insert a telephone line cord into the bottom of each radio module.
2
Installing the MDW 9031/9031DCP
Pocket Phone
55