Lucent Technologies TransTalk 9000 Installation And Use Manual page 40

Installing a Single Carrier
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166 — Issue 3 — October 1999
Insert a telephone line cord into the bottom of each radio module.
6
Slide the telephone line cords through the rear exit slots on the bottom of the
7
carrier. Cords originating from Modules 1 and 6 can share exit slots with cords
from Modules 2 and 5, respectively.
2
Installing the MDW 9031/9031DCP
Pocket Phone
33