Asf Motor - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.5.3 ASF Motor

1. Remove the Upper Housing / Printer Cover. (p.72)
2. Remove the Earth cable. (refer to 4.4.6 ASF Assy Step2 (p96) .)
3. Release the ASF Motor cable from the cable hook and disconnect the relay
connector.
4. Remove the two C.B.P. M3 x 8 screws that secure the ASF Motor and remove the
ASF Motor.
ASF Motor
1
Figure 4-154. Removing the ASF Motor
 Secure the grounding wire and the ASF Motor together with
the screw in the middle of the printer.
 Tighten the screws in the order shown in
Disassembly And Assembly
Cable Hook
4) C.B.P. M3x8
2
Earth cable
Figure 4-154
 Attach a piece of acetate tape (60 mm) on the ASF Motor Cable
as shown below.
Removing the Motors
ASF Motor Cable
Acetate tape
60mm
Figure 4-155. Attaching acetate tape
Revision C
123
Confidential