Epson WorkForce 1100 Service Manual page 109

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
10. Remove the C.B.S. M3 x 6 screw and the C.B.S.(P2) M3x10 screw that secure the
Right Support Frame and the Joint Tube, and remove the Right Support Frame and
the Joint Tube from the Main Frame.
2
Upper
surface
2) C.B.S. M3x6
(8±1 kgf.cm)
Figure 4-114. Removing the Right Support Frame
 Align the positioning holes on the Right Support Frame with
the guide pins on the Main Frame.
Figure 4-115. Installing the Right Support Frame
Disassembly And Assembly
Joint Tube
3) C.B.S. (P2) M3x10
(8±1 kgf.cm)
1
Right Support
Frame
Positioning holes and
Guide pins
Disassembling the Printer Mechanism
 Align the positioning hole of the Printer Mechanism with the
guide pin of the Joint Tube.
Positioning hole
and Guide pin
Figure 4-116. Reinstalling the Joint Tube
 Tighten the screws in the order shown in
11. Remove the Ink System Unit downwards from the Main Frame.
Figure 4-117. Removing the Ink System Unit
Revision C
Joint Tube
Figure 4-114
Ink System Unit
109
Confidential