Epson WorkForce 1100 Service Manual page 31

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
LED Indications
Error Status
Power
Ink low
-
Ink-out error
-
No ink cartridge/
-
CSIC error
Maintenance request Off
alternately 1
Fatal error Off
high speed
Note "*": Represents the part number of the Ink Cartridge. (See
Note : --: No change
Flash: Repeats turning On and Off every 1.25 seconds.
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
Flashes alternately 1: Same as the "Flash"
Flashes alternately 2: Repeats turning Off and On every 1.25 seconds.
Troubleshooting
Paper Ink
- Flash Replace Cartridge
Black: XXXX
Color: XXXX
...................
- Light
Epson recommends the genuine Epson cartridges listed above. Click the
[How to] button for ink cartridge installation instructions.
Ink cartridges cannot be recognized
Black: XXXX
Color: XXXX
- Light
...................
Epson recommends the genuine Epson cartridges listed above. Click the
[How to] button for ink cartridge installation instructions.
Service required
Flashes Flashes
The printer's ink pads are at the end of their service life. Please contact
alternately 2
Epson support.
General error
Flashes at Flashes at
Turn the printer off and delete all print jobs. Open the printer cover and
high speed
remove any paper from inside the printer and turn the printer back on.
?1.2.2 Ink Cartridge?
Table 3-1. List of Error Messages
STM3 Message
*
*
(p.10))
Overview
See the table for Troubleshooting
Refer to Table 3-7 ?Troubleshooting of Ink Low? (P.38)
Refer to Table 3-9 ?Troubleshooting of No Ink
Cartridge/CSIC Error? (P.39)
Refer to Table 3-10 ?Troubleshooting of Maintenance
Request? (P.40)
Refer to Table 3-11 ?Troubleshooting of Fatal Error?
(P.41)
Confidential
Revision C
31