Lubrication - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

6.1.3 Lubrication

The lubrication used for the components of the printer has been decided on based on
evaluation carried out by Epson. Therefore, the specified amount and places of
lubrication given in this section should be strictly observed.
 Never use oil or grease other than those specified in this
C A U T I O N
manual. Use of different types of oil or grease may damage the
components or affect the printer functions.
 Never apply a larger amount of oil or grease than specified in
this manual.
Table 6-2. Specified Lubricant
Type Name
Grease G-26
Grease G-45
Grease G-71
Grease G-74
Grease G-75
Maintenance
EPSON CODE Supplier
1080614 EPSON
1033657 EPSON
1304682 EPSON
1409257 EPSON
TBD EPSON
Adjust Parallel Bushing (Right)
Adjust Parallel Bushing (Left)
Left Side
Overview
<Lubrication Point>
Left and Right Adjust Parallel
Bushings (outer circumference)
<Lubrication Type>
G-26
<Lubrication Amount>

1mm x 2mm
<Remarks>
• Apply with a syringe.

(Pin Head: 1mm)
Right Side Face
• After lubrication, install and turn
the PG Cam Bush to spread the
grease evenly.
Left Side Face
Figure 6-1. Lubrication (1)
<Lubrication Point>
Contact point of the CR Scale
Mounting Plate (Left/Right) and the
Main Frame
<Lubrication Type>
G-26
<Lubrication Amount>
Apply evenly.
<Remarks>
Right Side
Apply with a brush.
Figure 6-2. Lubrication (2)
Revision C
155
Confidential