Epson WorkForce 1100 Service Manual page 100

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
5. Release the two tabs that secure the ASF Sensor Flag from the inside of the ASF
Assy, and remove the ASF Sensor Flag from the LD Roller Shaft.
ASF Sensor Flag
Figure 4-89. Removing the LD Roller (2)
6. Remove the C.B.P. M3 x 8 screw that secure the ASF Support Plate from the
bottom side of the ASF Assy, and remove the ASF Support Plate from the ASF
Assy.
Bottom side
4) C.B.P. M3x8
(6±1 kgf.cm)
Figure 4-90. Removing the LD Roller (3)
Disassembly And Assembly
Inside
Tabs
LD Roller Shaft
ASF Support Plate
Disassembling the Printer Mechanism
7. While bending the LD Roller Shaft slightly, detach it from the shaft hole on the
left side of the ASF Assy, and remove the LD Roller Shaft.
8. Remove the LD Roller from the LD Roller Shaft.
Hole
Figure 4-91. Removing the LD Roller (4)
Revision C
LD Roller
LD Roller Shaft
Confidential
100