Motors & Sensors - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
2.5 Motors & Sensors
 Motors
Table 2-4. List of Motors
Fig. Name
Type: DC Motor
A PF Motor
Armature resistance: 12.2  ± 10%
Type: DC Motor
B APG Motor
Armature resistance: 64.7  ± 15%
Type: 4-phase 48-pole PM type stepping motor
C ASF Motor
Winding resistance: 7.0  ± 10% (per phase at 25°C)
Type: DC Motor
D CR Motor
Armature resistance: 23.6  ± 10%
Type: 4-phase 48-pole PM type stepping motor
E Pump Motor
Winding resistance: 10.3  ± 10% (per phase at 25°C)
 Sensors
Table 2-5. List of Sensors
Fig. Name
1 PF Encoder sensor Type: Rotary Encoder
Type: Transmissive photo interrupter
Sensor output:
2 APG Sensor (1)
• High: In the domain of each PG position
• Low: Between PG positions
Type: Transmissive photo interrupter
Sensor output:
3 APG Sensor (2)
• High: In the domain of large PG
• Low: In the domain of small PG
Type: Transmissive photo interrupter
Sensor output:
4 ASF Sensor
• High: Home position
• Low: Other than home position
Type: Transmissive photo interrupter
Sensor output:
5 PE Sensor
• High (2.4 V or more): No paper
• Low (0.4 V or less): Paper exists
6 CR Encoder sensor Type: Linear Encoder
Operating Principles
Specific
Drive voltage: 42 V DC ± 5%
Drive voltage: 42 V DC ± 5%
Drive voltage: 42 V DC ± 5%
Drive voltage: 42 V DC ± 5%
Drive voltage: 42 V DC ± 5%
Specific
Drive voltage: 3.3 V DC ± 5%
Drive voltage: 3.3 V DC ± 5%
±
Drive voltage: 3.3 V DC 5%
±
Drive voltage: 3.3 V DC 5%
±
Drive voltage: 3.3 V DC 5%
±
Drive voltage: 3.3 V DC 5%
Motors & Sensors
Table 2-5. List of Sensors
Fig. Name
Type: Reflective photo interrupter
Sensor output:
7 PW Sensor
• High: No paper
• Low: Paper exists
Type: Mechanical contact
Sensor output:
Cover Open
8
Sensor • High: Cover closed
• Low: Cover open
4
B
3
2
A
1
8
Figure 2-3. Motors and Sensors Layout
Revision C
Specific
Drive voltage: 3.3 V DC ± 5%
Drive voltage: 3.3 V DC ± 5%
5
6
C
D
E
7
25
Confidential