Epson WorkForce 1100 Service Manual page 111

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
4. Remove the Spacer from the EJ Roller Shaft.
5. Remove the guide pins on Left Bushing 8 from the Main Frame using tweezers,
and turn Left Bushing 8 toward you to align with the notches on the Main Frame.
Notch
Left Bushing 8
Figure 4-121. Removing the Spacer and Rotating the Left Bushing 8
Insert the spacer into the groove on the Front Paper EJ Roller.
6. Slide the Front Paper EJ Roller to the left, and remove the Left Bushing 8 from the
Main Frame.
Figure 4-122. Removing the Left Bushing 8
Disassembly And Assembly
Guide
pin
Spacer
Groove
Front Paper EJ Roller
Disassembling the Printer Mechanism
7. Return the Carriage Unit to its home position.
8. Remove the C.B.S. M3 x 6 screw that secure the Left Front Frame.
9. Release the tab that secures the Front Paper Guide from the Main Frame and slide
the Front Paper Guide to the left, and turn it until the front side faces up to remove
the Front Paper Guide together with the Paper EJ Roller.
2) C.B.S. M3x6
2) C.B.S. M3x6
(8±1 kgf.cm)
Paper EJ Rollers (Front side)
Paper EJ Rollers (Back side)
Figure 4-123. Removing the Front Paper Guide and Paper EJ Rollers
Revision C
Left Front
Frame
Tab
Front Paper Guide
Confidential
111