Disassembly - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.1.6 Disassembly

The flowchart below lists the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Start
Front Decoration
Rear Housing
Plate Left/Right
(p.68)
(p.68)
Front Decoration
Plate Left/Right
(p.68)
Decoration Plate
Left/Right (p.71)
Panel Unit (p.69)
Upper Housing /
Printer Cover
(p.72)
Upper Housing Board Assy (Main
Support Assy Board/Power Supply
(p.74) Board) (p.75)
Lower Housing /
Printer Mechanism
(p.86)
ASF Assy (p.96) PF Motor (p.122)
PE Sensor Holder
APG Assy (p.78)
(p.126)
Release Holder Assy
(p.117)
PE Sensor Holder
(p.126)
Upper Paper Guide
Assys (p.118)
Disassembly And Assembly
Paper Support Assy
Panel Unit (p.69)
(p.67)
Cover Open Sensor
(p.127)
APG Assy (p.78) CR Scale (p.79) PF Encoder (p.124)
Waste Ink Pad /
Front Paper Guide
Waste Ink Tray Assy
Pad (p.103)
(p.104)
Figure 4-3. Disassembly Flowchart

C H E C K
P O I N T
Stacker Assy

(p.67)
ASF Motor (p.123)
Paper EJ Frame Assy
ASF Assy (p.96)
(p.106)
Front Paper Guide / Paper
Foot (p.105)
EJ Roller / Front Paper
Guide Pad Tray (p.110)
PF Encoder (p.124)
Upper Paper Guide
Assys (p.118)
PF Roller Shaft
CR Motor (p.120)
(p.115)
Overview
The boxes shown in a dotted-line are not the shortest
procedures, but are necessary to proceed to the next step.
Since a prototype was used to illustrate these disassembly
and assembly procedures, the appearance of some parts
may differ from those on an actual product.
Printhead / CSIC
Assy (p.81)
CR Scale (p.79)
APG Assy (p.78)
Carriage Shaft /
Carriage Unit
(p.88)
PW Sensor (p.125) CR Encoder (p.124)
Paper EJ Frame Assy
ASF Motor (p.123)
(p.106)
Ink System Unit
LD Roller (p.99)
(p.107)
Revision C
Retard Roller Assy
(p.101)
66
Confidential