Asf Motor - Epson Stylus Office T1110 Service Manual

_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.5.3 ASF Motor

1. Remove the Upper Housing / Printer Cover. (p.72)
2. Remove the Earth cable. (refer to 4.4.6 ASF Assy Step2 (p96) .)
3. Release the ASF Motor cable from the cable hook and disconnect the relay
connector.
4. Remove the two C.B.P. M3 x 8 screws that secure the ASF Motor and remove the
ASF Motor.
ASF Motor
1
Figure 4-154. Removing the ASF Motor
Secure the grounding wire and the ASF Motor together with
the screw in the middle of the printer.
Tighten the screws in the order shown in
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Disassembly And Assembly
高速行式打印机 http://www.lineprinter.com.cn/
Cable Hook
4) C.B.P. M3x8
2
Earth cable
Figure 4-154
Attach a piece of acetate tape (60 mm) on the ASF Motor Cable
as shown below.
打印机驱动下载 http://www.printerwhy.com/
Removing the Motors
ASF Motor Cable
Acetate tape
60mm
Figure 4-155. Attaching acetate tape
Revision A
123
Confidential