Epson WorkForce 1100 Service Manual page 161

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
5. Hold the Carriage Unit, and while turning the Carriage Shaft, move the Carriage
Unit to the left end of the Carriage Shaft to lubricate the grease evenly.
6. Lubricate grease with the syringe at the point shown in refer to Figure 6-22.
Lubrication Type
G-71
Figure 6-22. Lubricating the Carriage Shaft (4)
Maintenance
Lubrication Amount
140mg ± 10mg
Lubrication Point
7. Hold the Carriage Unit, and while turning the Carriage Shaft, move the Carriage
Unit to the right end of the Carriage Shaft to lubricate the grease evenly.
Figure 6-23. Lubricating the Carriage Shaft (5)
8. Repeat step 4 ~ 7.
Overview
Revision C
161
Confidential