Explanation Of Menu And Settings - Epson AcuLaser C2600 Service Manual

EPSON AcuLaser C2600/2600

1.17.3 Explanation of Menu and Settings

The following are items specific to this printer.
Information Menu
Toner Check Sheet
Prints a check sheet for checking the level of toner remaining in each of the toner
cartridges when operating in color or 4xB/W mode.
When operating in color mode, the check sheet is printed using all C, M, Y, and K
toners.
When operating in 4xB/W mode, the check sheet is printed using the black toner
and each of the black toners in the C, M, and Y toner positions. (Refer to
Toner Check Sheet" (p.79).)
Toner Ave.
This menu is available only when the printer is in the B/W mode. It displays the
average amount of toner left in the four black toner cartridges.
Color Pages, B/W Pages
Displayed only when operating in color mode. When operating in 1- or 4-cartridge
monochrome mode, only the Total Pages is displayed.
On the Engine Status Sheet, all information is printed regardless of the mode.
Setup Menu
Lang
Simplified Chinese (China), traditional Chinese (Taiwan), and Korean are added
to language settings.
Toner Out
Sets whether to stop printing by causing "Toner Out" error or continue printing
without causing the error.
By default, printing is stopped by causing "Toner Out" error.
When operating in 4xB/W mode, printing continues until all toners meet the
"Toner Out" condition. Printing does not stop if there is at least one cartridge with
remaining toner.
In color mode, it is possible to continue printing in monochrome mode if the black
toner is not in "Toner Out" conditions even when the color toners are.
Product Description
Mode Config Menu
Remove All Toner
Specify this operation when removing all toners from the printer.
Execution of the operation is as follows.
Step Panel Message
1 Please Wait
Remove Toner
2
(first (Y) toner cartridge)
"1.24
3 Please Wait
Remove Toner
4
(second (M) toner cartridge)
5 Please Wait
Remove Toner
6
(third (C) toner cartridge)
7 Please Wait
Remove Toner
8
(fourth (K) toner cartridge)
9 Please Wait
10 Please Shutdown
Turn on the power again after all toners are removed. "Install x Toner" is
displayed and the printer enters the toner installation mode. Operation cannot be
canceled during processing. When operating in B/W mode, "Please Shutdown" is
displayed after "Please Wait" when the first cartridge is removed, and then the
process finishes.
Change Mode B/W
Execute this operation for replacing the toner cartridges when switching from
color or 4xB/W mode to B/W mode. When the operation is complete, the printer
reboots automatically and switches to B/W mode.
Control Panel
Table 1-46. Remove All Toner
Operation
Open the cover and remove the corresponding toner.
Close the cover.
Jump to the last step when operating in B/W mode.
Open the cover and remove the corresponding toner.
Close the cover.
Open the cover and remove the corresponding toner.
Close the cover.
Open the cover and remove the corresponding toner.
Close the cover.
Turn off the power.
Revision B
56