Epson AcuLaser C2600 Service Manual page 315

EPSON AcuLaser C2600/2600
4.5.10.8 DETECTOR, HUMIDITY
1. Draw out the Standard lower paper cassette.
2. Remove the GUIDE ASSY., FEED, LEFT.
3. Remove the screw that secures DETECTOR, HUMIDITY, and remove both the
COVER, DETECTOR, HUMIDITY and the DETECTOR, HUMIDITY.
C.C.P-TITE SCREW,3x8,F/Zn: 1
4. Disconnect the connector (White 4 Pin) from the DETECTOR, HUMIDITY.
1. Place the COVER, DETECTOR, HUMIDITY on the rib shown in
the figure.
2. Make sure that the harness is routed as shown in the figure.
Disassembly and Assembly
(p.254)
Disassembling/Assembling the Main Unit
DETECTOR, HUMIDITY
3-1
4
COVER, DETECTOR, HUMIDITY
Reassembly 1
Figure 4-106. Removal of DETECTOR, HUMIDITY
Revision B
Reassembly 2
04008901
315