Epson AcuLaser C2600 Service Manual page 311

EPSON AcuLaser C2600/2600
4.5.10.4.1 Removing and installing the FRAM BOARD
1. Close the 2 tabs of the attachment shaft that secure the FRAM BOARD and
remove the FRAM BOARD while disconnecting the connector from the
attachment shaft.
2. Connect the FRAM BOARD that is removed in the step 1 to the connector on a
new BOARD ASSY., MAIN C585 MCU, and insert the FRAM BOARD to the
attachment shaft.
Disassembly and Assembly
FRAM BOARD
Disassembling/Assembling the Main Unit
1-3
1-2
1-1
1-1
2-1
2-2
Figure 4-102. FRAM Board Replacement
Revision B
04008501
311