Epson AcuLaser C2600 Service Manual page 102

EPSON AcuLaser C2600/2600
TRANSFER BELT UNIT
Cleaner Clutch
This clutch switches the drive force of the main drive motor to the cleaning blade cam.
Cleaning Blade Cam, Cleaning Blade Lever, Cleaning Blade
The cleaning blade contacts the belt when the cleaning is in progress and is kept
away from the belt while the toner image being formed on the belt. The movement
is made by the cleaning blade cam, which is driven by the main motor power, and
the cleaning blade lever operated by the cam rotation.
Spiral
The spiral is driven by the main motor and carries the waste toner to the waste
toner collector.
Waste Toner Collector
Collects the remaining toner on the belt.
Waste Toner Collector Full State Detection Sensor
A photo-interrupter sensor that detects the collector is full.
Operating Principle
Cleaner Clutch
Cleaning
Blade Lever
Spiral
Waste Toner Collector
Full State Detection Sonsor
Waste Toner Collector
Figure 2-23. Transfer Belt Unit/Waste Toner Collector
Print Process
Cleaning Blade Cam
Cleaning Blade
Revision B
02002501
102