Adjustment Program (Lpssp); Overview; Setup Before Adjustment - Epson AcuLaser C2600 Service Manual

EPSON AcuLaser C2600/2600

5.2 Adjustment Program (LPssp)

5.2.1 Overview

This section explains the adjustment procedures using the dedicated program tool
(LPssp). The basic operation instructions of the tool are also provided.
Name of the adjustment program
LPssp (Laser Printer Service Support Program)
Operating Environment
OS Requirements
Windows 98, Windows 2000, Windows XP
Supported Port
LPT/USB
This program may not work properly depending on the OS
C A U T I O N
installed on the computer. Make sure to read the precautions in the
release note provided with the program before installing and
executing the program.

5.2.2 Setup before Adjustment

This section describes the necessary preparations which should be made for
adjustments with the program.
Adjustment
5.2.2.1 Installing the Adjustment Program
In case you need to reinstall the program, make sure to first
C A U T I O N
uninstall the pre-installed one using the [Add/Remove Programs] in
the [Control Panel].
1. Unzip the file that contains the Adjustment Program, and double-click on the
"Setup.exe" file icon.
2. The LPssp installer will start up. Install the LPssp following the wizard.
Adjustment Program (LPssp)
Setup.exe
Figure 5-1. Installing the Program (1)
Figure 5-2. Installing the Program (2)
Revision B
367