EPSON AcuLaser C2600/2600
1.26.2 Switching of Printer Driver
EPSON STATUS MONITOR 3 IS INSTALLED.
The driver switches to the corresponding mode automatically when it acquires the
information on the toner cartridges installed on the printer.
Color Mode
Figure 1-16. Printer Driver
Product Description
EPSON STATUS MONITOR 3 IS NOT INSTALLED.
The mode setting of the printer driver should be changed manually to switch the mode.
1.
2.
Monochrome Mode
01005101
Switching between Color Mode and Monochrome Mode
Control Panel → Printer and FAX → Properties → "Optional Settings" tab
Click [Settings...] → Check/Uncheck the "Color Toner Cartridges"
Figure 1-17. Printer Driver Setup
C H E C K
If the setup above is not performed, U/I remains its original state.
P O I N T
In monochrome mode (Only black toner is installed), if the printing
is carried out with "Color Toner Cartridges" selected on the printer
driver, "Color Data Received" (flashing error) is displayed on the
LCD panel of the printer.
Once the message is displayed, press [Start/Stop] button to convert
and print the data in monochrome.
Revision B
01005201
84