Epson AcuLaser C2600 Service Manual page 356

EPSON AcuLaser C2600/2600
4.6.2.2 ROLLER, DUPLEX
REMOVAL
D1. Open the MP TRAY ASSY.
D2. Release the tab of the SPUR GEAR, 19, PAPER EJECT on the rear end of the
ROLLER, DUPLEX, open the GUIDE, DUPLEX, INNER, slide the ROLLER,
DUPLEX forward, and remove the SPUR GEAR, 19, PAPER EJECT and the
BUSHING, 6.
D3. Release the tab of the SPUR GEAR, 19, PAPER EJECT on the front end of the
ROLLER, DUPLEX, to remove the SPUR GEAR, 19, PAPER EJECT from the
ROLLER, DUPLEX.
D4. Remove the E-RING, 4, F/Uc from the front end of the ROLLER, DUPLEX, and
remove the BUSHING, 6.
D5. Lift the rear of the ROLLER, DUPLEX, and pull out the GUIDE, DUPLEX,
OUTER obliquely upward toward rear.
Disassembly and Assembly Disassembling/Assembling the Options
SPUR GEAR, 19,
PAPER EJECT
ROLLER,
DUPLEX
D2-2
D2-5
D5
D4-2
D4-1
D3-2
D3-1
Figure 4-147. Removal of ROLLER, DUPLEX
Revision B
SPUR GEAR, 19,
PAPER EJECT
D2-3
D2-1
D2-4
SPUR GEAR,
19, PAPER
EJECT
04013001
356