EPSON AcuLaser C2600/2600
4.5.12 Paper Cassette
4.5.12.1 HOLDER, CASSETTE/LATCH, CASSETTE
HOLDER, CASSETTE
1.
Draw the Standard lower paper cassette out of the printer.
2.
Remove the 2 screws that secure the HOLDER, CASSETTE.
C.C.P-TITE SCREW,4X10,F/Zn: 2
3.
Release the 5 tabs that secure the HOLDER, CASSETTE to remove the
HOLDER, CASSETTE.
1.
Match the 6 notches at the bottom of the HOLDER, CASSETTE
with the ribs of the TRAY, CASSETTE.
LATCH, CASSETTE
1). Draw the Standard lower paper cassette out of the printer.
2). Press down the LIFT PLATE, MPC, and secure it with the LATCH, CASSETTE.
Perform the following work holding the LIFT PLATE, MPC with
C A U T I O N
your hand as it pops up.
3). Remove the EXTENSION, SPRING, 0.39 from the attachment hole of the
LATCH, CASSETTE.
4). Release the 2 tabs that secure the LATCH, CASSETTE by moving them inward to
remove the LATCH, CASSETTE.
Disassembly and Assembly
3)
4)-1
Figure 4-130. Removal of HOLDER, CASSETTE/LATCH, CASSETTE
Disassembling/Assembling the Main Unit
EXTENSION,
SPRING, 0.39
2)-1
2)-2
LIFT PLATE,
MPC
3
LATCH,
CASSETTE
4)-2
4)-1
Reassembly
1
Revision B
2
2
HOLDER,
CASSETTE
04011301
339