EPSON AcuLaser C2600/2600
PRINTING START POSITION ACCURACY
Table 1-21. Printing Start Position Accuracy
A4/A3
Main scanning direction Reference point (c)
Sub-scanning direction Reference point (a)
a
c
Printable Area
d
e
Figure 1-4. Printing Start Position Accuracy
SKEW
Table 1-22. Skew
A4
Main scanning direction (| a-b |)
Sub-scanning direction (| c-d |)
Table 1-23. Length Standard of Measurement
Main scanning direction (e)
Simplex printing
Duplex printing
Sub-scanning direction (f)
Product Description
Simplex printing
Duplex printing
±
±
2.0 mm
3.0 mm
±
±
2.5 mm
2.5 mm
b
f
01000601
Simplex printing
Duplex printing
1.47 mm
2.21 mm
2.05 mm
3.07 mm
A4
208 mm
289 mm
Reliability and Serviceability
HEIGHT OF CURL ON OUTPUT PAPER
Table 1-24. Height of Curl on Output Paper
Paper type
Standard paper, Plain paper
Transparency
Other special papers
Note 1: The same for simplex and duplex printing
2: Measurement conditions:
Image occupation rate 5 % misaligned monochrome printing, or color
printing with 5 % of each color (total 20 %).
Print 10 sheets of 1p/J intermittent printing, then measure after an
interval of 1 minute.
Differs in accordance with the image occupation rate/array pattern
printing conditions.
1.4.2 Durability
PRINT VOLUME
Average:
8,000
pages/month*
Maximum: 48,000 pages/month (Color
120,000 pages/month (Monochrome
NOTE *1: Product lifetime 480,000 pages assuming the ratio of color and monochrome
printing is 1:1; 5 years assuming the usage is 8,000 page/months.
*2: The ratio of color and monochrome printing is 1:1
Color printing only:30,000 pages/month
*3: 6,000 pages (MaxPV/day) x 20 days
1.4.3 Serviceability
MTTR
Average 30 minutes or less
The MTTR value indicated above represents the time for service personnel to
locate and correct the malfunction only, and the time for examining malfunction is
not included.
Revision B
Height of Curl
30 mm or less
15 mm or less
No regulation
1
2
mode)*
3
mode)*
25