Epson AcuLaser C2600 Service Manual page 304

EPSON AcuLaser C2600/2600
4.5.9.10 DRIVE ASSY., RT(, ASP)
REMOVAL
C A U T I O N Parts composition of the DRIVE ASSY., RT, ASP provided as a
service part is slightly different from the one that is installed at the
shipment.
Never remove the DRIVE ASSY., RT, ASP at times other than
replacing it with a service part.
Reinstalling the DRIVE ASSY RT (or DRIVE ASSY., RT, ASP)
that is removed during disassembly will cause malfunction of the
printer.
D1. Remove the HOUSING, REAR.
D2. Disconnect the connector of the DRIVE ASSY., RT, ASP from the BOARD
ASSY., DRV, C585 DRV.
D3. Remove the four screws that secure the DRIVE ASSY., RT, ASP and remove the
DRIVE ASSY., RT, ASP.
C.P.POLYWAVEA,3x6,F/Zn: 4
Disassembly and Assembly
(p.244)
Disassembling/Assembling the Main Unit
D2
D3
D3
D3
D3
DRIVE ASSY., RT
Figure 4-95. Removal of DRIVE ASSY., RT
Revision B
04008001
304