Epson AcuLaser C2600 Service Manual page 338

EPSON AcuLaser C2600/2600
4.5.11.13 COVER, RIGHT
1. Remove the MP TRAY ASSY. (p.333)
2. Remove the COVER, UPPER, MP.
3. Remove the HOLDER, CAP, T2, FRONT ASSY.
4. Remove the COVER, REAR, MP.
5. Remove the LEVER ASSY., GUIDE, ASP.
6. Remove the HOUSING, MP ASSY.
7. Remove the screw that secure the LEVER, COVER, RIGHT, and remove the
LEVER, COVER, RIGHT and the COMPRESSION SPRING, 1.0 (2 places).
C.C.P-TITE SCREW,3x8,F/Zn: 1 each
8. Remove the screw that secures the CAP, 2ND ASSY. to remove the CAP, 2ND
ASSY.
C.C.P-TITE SCREW,3x8,F/Zn: 1
1. Match the dowel of the CAP, 2ND ASSY. with the positioning
hole.
9. Remove the 3 screws that secure the FRAME ASSY., MP to remove the FRAME
ASSY., MP.
C.C.P-TITE SCREW,3x8,F/Zn: 3
2. Match the positioning hole of the FRAME ASSY., MP with the
dowel.
Disassembly and Assembly
(p.331)
(p.337)
(p.334)
(p.332)
(p.326)
Disassembling/Assembling the Main Unit
9-1
9-1
9-1
COMPRESSION
SPRING, 1.0
7
7
LEVER, COVER, RIGHT
Reassembly 1
Figure 4-129. Removal of COVER, RIGHT
Revision B
CAP, 2ND ASSY. FRAME ASSY., MP
8
COVER, RIGHT
Reassembly 2
04011201
338