Status Messages And Troubleshooting; Warning Messages And Troubleshooting - Epson AcuLaser C2600 Service Manual

EPSON AcuLaser C2600/2600

1.18.2 Status Messages and Troubleshooting

The following are items specific to this printer.
Sleep
Explanation
The Sleep Mode in AcuLaser C2600/2600 is applying to Blue Angel Mark and
Energy Star Program.
Turns to sleep mode automatically in 30 minutes. (Default)

1.18.3 Warning Messages and Troubleshooting

The following lists the items in the specification specific to this printer.
Warnings do not affect the status of the LEDs.
Clean Parts v v (v = a, b)
Explanation/Remedy
Open cover D (front cover), pull and push the lever indicated by "v" several times,
and then close the cover to clear the error.
a: For cleaning the photoconductor wire (Cleaning Knob a)
b: For cleaning the exposure window (Cleaning Knob b)
The bit allocation of status code is as follows.
a: bit 0
b: bit 1
For details on cleaning, refer to "Patch Sensor" (p.388)
(p.388).
Product Description
uuuu Toner Low
NOTE: In 4xB/W mode, this message will appear when the mean value of four
or "Exposure Window"
Printer Status
Explanation
When remaining toner is low level, this message will appear.
Mode uuuu
Color Mode
C, M, Y, K
B/W mode
K
4xB/W mode KC, KM, KY, KK
cartridges reaches the low level.
Revision B
61