Epson AcuLaser C2600 Service Manual page 256

EPSON AcuLaser C2600/2600
4.5.3.3 Paper Eject Sensor (DETECTOR, HP; E)
REMOVAL
D1. Remove the COVER ASSY., FU.
D2. Remove the screw that secures the DUCT, PAPER EJECT, LOWER and slide the
DUCT, PAPER EJECT, LOWER toward right side to release 2 tabs to remove the
DUCT, PAPER EJECT, LOWER.
C.C.P-TITE SCREW,3x10,F/Zn: 1
D3. Remove the screw that secures the EJECT ROLLER UNIT and lift up the left side
of the EJECT ROLLER UNIT to remove it.
C.B.P-TITE SCREW,3x8,F/Zn: 1
D4. Remove the 7 screws that secure the GUIDE, PAPER EJECT to remove the
GUIDE, PAPER EJECT.
C.C.P-TITE SCREW,3x10,F/Zn: 7
D5. Disconnect the connector from the Paper eject sensor.
D6. Release the 3 tabs to remove the Paper eject sensor.
Disassembly and Assembly
(p.242)
Disassembling/Assembling the Main Unit
DUCT, PAPER EJECT,
LOWER
D3-1
D3-2
D4
D4
D4
D4
D6-1
D5
D6-1
Paper Eject Sensor
D6-1
D6-2
Figure 4-47. Removal of Paper Eject Sensor
Revision B
D2-2
D2-2
D2-1
EJECT
ROLLER
D4
UNIT
GUIDE,
PAPER EJECT
D4
D4
04003501
256