Engineering Mode - Vision Fitness S7100 Owner's Manual

enGineeRinG MoDe

Engineering mode consists of 17 optional settings. Use the engineering
mode to enable certain features or displays on your console.
enteRinG anD UsinG enGineeRinG MoDe
• Press and hold the UP s and DOWN t resistance keys for
approximately three seconds.
• The console will beep and display engineering modes and optional
settings. Use the UP s or DOWN t keys to scroll through the options.
Press the ENTER key to select the appropriate mode or setting.
optional settinGs
S E T T I N G
p1 – set Max tiMe
p2 – set UseR tiMe
p3 – set UseR aGe
p4 – set weiGHt
p5 – DeFaUlt
Resistance level
p6 – DeFaUlt incline level
p7 – DeFaUlt lanGUaGe
p8 – Unit
p9 – accUMUlateD Data
p10 – DisplaY test
p11 – HaRDwaRe test
p12 – incline Reset
p13 – incline calibRation
p14 – aDJUst incline
p15 – beepeR MoDe
p16 – saFetY MoDe
p17 – veRsion
• Use the UP s and DOWN t keys within each setting to change the setting.
• Press the ENTER key to save settings.
• To EXIT engineering mode, press and hold the START key for three seconds.
D E S C R I P T I o N
allows YoU to set tHe MaxiMUM tiMe a pRoGRaM can RUn FoR.
allows YoU to set tHe tiMe tHat tHe coMpUteR will DeFaUlt to FoR all pRoGRaMs.
allows YoU to set tHe aGe tHat tHe coMpUteR will DeFaUlt to DURinG setUp.
allows YoU to set tHe weiGHt tHat tHe coMpUteR will DeFaUlt to DURinG setUp.
allows YoU to set tHe Resistance level tHat tHe coMpUteR will DeFaUlt to FoR all
pRoGRaMs.
allows YoU to set tHe incline level tHat tHe coMpUteR will DeFaUlt to FoR all
pRoGRaMs.
allows YoU to cHoose, FRoM tHe available lanGUaGes, wHat lanGUaGe text will be
DisplaYeD in.
allows YoU to set exeRcise FeeDbacK to enGlisH (Miles) oR MetRic (KiloMeteRs) sYsteM.
allows YoU to view tHe total tiMe in HoURs anD total Distance in Miles oR KiloMeteRs
accUMUlateD on YoUR pRoDUct.
test UseD bY seRvice tecHnicians to test lcD DisplaYs.
test UseD bY seRvice tecHnicians to test eDDie cURRent bRaKe sYsteM.
allows YoU to tURn on oR oFF tHe incline Reset at tHe enD oF tHe woRKoUt.
aUto-calibRation oF elevation MotoR to set Min, Max, anD ZeRo positions.
allows YoU to aDJUst tHe MiniMUM anD MaxiMUM incline levels.
allows YoU to tURn tHe beepeR on oR oFF.
allows YoU to set Unit so Resistance is FUllY enGaGeD wHen not in Use.
allows seRvice tecHnicians to view soFtwaRe veRsion UseD bY console.
21