21 - 162
TRANSAXLE
VALVE BODY (Continued)
(4) Verify that all retainers are installed as shown
in (Fig. 435). Retainers should be flush or below
valve body surface.
Fig. 435 Valve Retainer Location
1 - RETAINER
2 - RETAINER
(5) Install 2/4 Accumulator components as shown
in (Fig. 436). Torque 2/4 Accumulator retainer plate
to 5 N·m (45 in. lbs.).
Fig. 436 2/4 Accumulator Assembly
1 - VALVE BODY
2 - RETAINER PLATE
3 - DETENT SPRING
4 - SPRINGS
5 - SEALS
6 - PISTON
(6) Install check balls into position as shown in
(Fig. 437). If necessary, secure them with petrolatum
or transmission assembly gel for assembly ease.
(7) Install thermal valve to the transfer plate (Fig.
438).
(8) Install oil screen to transfer plate (Fig. 439).
LH