Chrysler 2004 Concorde Service Manual page 1198

Hide thumbs Also See for 2004 Concorde:

Table of Contents

42LE AUTOMATIC TRANSAXLE (Continued)

(23) Remove front carrier/rear annulus and #6 nee-

dle bearing (Fig. 36).

Fig. 36 Remove Front Carrier/Rear Annulus

1 - #6 NEEDLE BEARING

2 - FRONT CARRIER AND REAR ANNULUS ASSEMBLY (TWIST

AND PULL OR PUSH TO REMOVE OR INSTALL).

(24) Remove rear sun gear and #7 needle bearing

(Fig. 37) (Fig. 38).

Fig. 37 Remove Rear Sun Gear

1 - #7 NEEDLE BEARING

2 - REAR SUN GEAR

NOTE: The number seven needle bearing has three

antireversal tabs and is common with the number

five and number two position. The orientation

should allow the bearing to seat flat against the

rear sun gear (Fig. 38). A small amount of petrola-

tum can be used to hold the bearing to the rear sun

Fig. 38 Number 7 Bearing

1 - #7 BEARING

2 - REAR SUN GEAR

(25) Install and load Tool 5058 to remove 2/4

clutch retainer snap ring (Fig. 39).

Fig. 39 Remove 2/4 Clutch Retainer Snap Ring

1 - TOOL 5058

2 - SCREWDRIVER

3 - SNAP RING

4 - 2/4 CLUTCH RETAINER

Chapters

Table of Contents