Installation - Chrysler 2004 Concorde Service Manual

Hide thumbs Also See for 2004 Concorde:

Table of Contents

SHIFT INTERLOCK SOLENOID (Continued)

(6) Remove the 2 screws attaching the lower

shroud to the steering column (Fig. 364). Remove the

lower shroud from the steering column.

Fig. 364 Lower Shroud Attaching Screws

1 - LOWER SHROUD

2 - MOUNTING SCREWS

(7) Disconnect the wiring harness connector from

the brake transmission shift interlock (BTSI) sole-

noid (Fig. 365).

Fig. 365 Solenoid Connector

1 - BTSI SOLENOID

2 - CONNECTOR

(8) Remove the retainer clip from the end of the

BTSI solenoid (Fig. 366).

Fig. 366 Solenoid Retainer Clip

1 - SOLENOID

2 - MOUNTING STUD

3 - RETAINER CLIP

(9) Slide the BTSI solenoid straight off the shift

lever mounting stud.

INSTALLATION

(1) Align the flat inside the brake transmission

shift interlock (BTSI) solenoid (Fig. 367) with the flat

on the shift lever mounting stud.

Fig. 367 Flat Inside BTSI Solenoid

2 - SOLENOID

TRANSAXLE 21 - 135

Table of Contents