Chrysler 2004 Concorde Service Manual page 1220

21 - 40 TRANSAXLE
42LE AUTOMATIC TRANSAXLE (Continued)
(36) Install rear sun gear and #7 needle bearing
(Fig. 124).
Fig. 124 Install Rear Sun Gear
1 - #7 NEEDLE BEARING
2 - REAR SUN GEAR
(37) Install front carrier/rear annulus assembly
and #6 needle bearing (Fig. 125).
Fig. 125 Install Front Carrier/Rear Annulus Assy.
1 - #6 NEEDLE BEARING
2 - FRONT CARRIER AND REAR ANNULUS ASSEMBLY (TWIST
AND PULL OR PUSH TO REMOVE OR INSTALL).
(38) Install front sun gear assembly and #4 thrust
washer (Fig. 126).
Fig. 126 Install Front Sun Gear Assembly
1 - FRONT SUN GEAR ASSEMBLY
2 - #4 THRUST WASHER (FOUR TABS)
(39) Determine proper #4 thrust plate thick-
ness.
(a) Select the thinnest #4 thrust plate thickness.
(b) Install #4 thrust plate (Fig. 127) using petro-
latum to hold into position.
Fig. 127 No. 4 Thrust Plate
1 - OVERDRIVE SHAFT ASSEMBLY
2 - #4 THRUST PLATE (SELECT)
3 - PETROLATUM (FOR RETENTION)
LH