Chrysler 2004 Concorde Service Manual page 1287

LH
INPUT CLUTCH ASSEMBLY (Continued)
(5) Remove the reverse clutch pack (two fibers/one
steel) (Fig. 265).
NOTE: Tag reverse clutch pack for reassembly iden-
tification.
Fig. 265 Reverse Clutch Pack
1 - REVERSE CLUTCH PLATE
2 - REVERSE CLUTCH DISC
(6) Remove the OD/Reverse reaction plate snap
ring (Fig. 266).
Fig. 266 OD/Reverse Pressure Plate Snap Ring
1 - OD/REVERSE PRESSURE PLATE
2 - SCREWDRIVER
3 - OD/REVERSE PRESSURE PLATE SNAP RING
(7) Remove OD/Reverse pressure plate (Fig. 267).
Fig. 267 OD/Reverse Reaction Plate
1 - OD/REVERSE PRESSURE PLATE (STEP SIDE DOWN)
2 - (STEP SIDE DOWN)
(8) Remove OD/Reverse reaction plate wave snap
ring (Fig. 268).
Fig. 268 Waved Snap Ring
1 - OVERDRIVE SHAFT ASSEMBLY
2 - OD/REVERSE CLUTCH WAVED SNAP RING
3 - SCREWDRIVER
TRANSAXLE 21 - 107