Chrysler 2004 Concorde Service Manual page 1033

LH
TIMING BELT COVER(S) - REAR (Continued)
Fig. 137 Rear Timing Belt Cover Bolts
1 - REAR COVER TO CYLINDER HEAD BOLTS
2 - APPLY SEALANT TO BOLT THREADS
3 - REAR COVER TO CYLINDER BLOCK BOLTS
1 - REAR COVER - RIGHT SIDE
2 - FOAM SEAL
ing surfaces and grooves (Fig. 139). Lubricate new
O-rings with Mopar Dielectric Grease or equivalent
to facilitate assembly.
1 - O-RINGS
2 - WATER PUMP IMPELLER
Fig. 138 TIMING COVER REAR SEALS
3 - REAR COVER - LEFT SIDE
4 - FOAM SEALS
(2) Clean right rear timing belt cover O-ring seal-
(3) Position NEW O-rings on cover (Fig. 139).
Fig. 139 Right Side Timing Belt Cover O-Rings
ENGINE 9 - 81