Switching The Power On And Off - Roland XC-540 User Manual

2-1 Switching the Power On and Off

Switching the Power On and Off
This machine has a main power switch and a sub power switch. Switch on both to use the machine.
Whenever outputting is finished, switch off the sub power. Also, raise the loading lever.
Leave the main power switches
P.78 "Alarm Feature"
WARNING
➀ Main power switch
Important Note on Switching Off the Power
Never switch off the main power or unplug the power
cord suddenly while operation is in progress. Doing so
may damage the print heads. Be sure to first switch off
the sub power.
If the main power is accidentally switched off, immedi-
ately turn the power back on.
28 Chapter 2 Operation
➀
on at all times, never switching either one off. An alarm is activated if left on.
When outputting is not being performed, remove any loaded media or switch off
the power.
The continued application of heat at a single location may cause the release of toxic gases
from the media or pose a fire hazard.
Be sure to leave
switched on at all times.
Rear of the printer
➁ Sub power switch
Front of the printer
Turn this switch on after
closing the front cover. To turn
it off, hold down the switch for
one second or longer.
Flip the loading lever down
to the rear when not in use.