Table of Contents
Advertisement
BASIC OPERATION 3
@ Call channel programming
SB Reh [6] gai
program An
fas
displayed channel as the call
aa: Pa
The call channel switch, [9], is used to select channel 9, how-
channel.
channel group for quick recall.
channel group stop flashing.
@ Push [CH/WX * U/I/C] for 1 sec.
1
one or more times to select
uy
i
i
j
the desired
channel
group
ie
Ma Display backlighting
grammed.
ibility under low light conditions.
@ Push [9] to select the call
PPro
;
channel of the selected chan-
usa LY.
While pushing [HI/LO * DIM], rotate the channel selector or
nel group.
use [UPJ[DN] switches on the microphone to adjust the back-
*"CALL' and the call channel num-
lighting.
ber appear.
|
'* Backlighting can be set to 1 of 7 intensities or turned OFF.
@ While pushing [HI/LO] push [9]
Se
to enter call channel write
mode.
* Call channel number and chan-
DIMMER
7
DIMMER
OFF
nel group to be programmed flash.
Backlighting set to brightest
Backlighting turned OFF
@ Rotate the channel selector to
a
a
select the desired channel.
cat
= CUA
ad
1
N
aS
See
|
Advertisement
Table of Contents
