Gps Operation - Icom IC-V82 Instruction Manual

■ GPS operation

The IC-V82/U82 can indicate the current position (Latitude and
Longitude) when a GPS receiver (compatible with an RS-232C
output/NMEA format/4800 bps) is connected to [DATA] jack. And
also can transmit the position data and message to other stations.
D D Position indication
q While connecting a GPS receiver, push [A•
] to enter
[0•
OPTION SET MODE
OPT
w Push [Y Y ] or [Z Z ] several times to select the GPS setting.
• "GPS" appears.
e Rotate [VOL] to set the suitable sentence formatter for the
connecting GPS receiver.
• For your position indication is necessary to select "GGA" or "RMC."
• Sentence formatters
1 GLL 6 GLL, GGA 11 GGA, GSA
2 GGA 7 GLL, RMC 12 GGA, VTG
3 RMC 8 GLL, GSA 13 RMC, GSA
4 GSA 9 GLL, VTG 14 RMC, VTG
5 VTG 10 GGA, RMC 15 GSA, VTG
] and
FUNC
.
16 GLL, GGA, RMC 21 GLL, GSA, VTG
17 GLL, GGA, GSA 22 GGA, RMC, GSA
18 GLL, GGA, VTG 23 GGA, RMC, VTG
19 GLL, RMC, GSA 24 GGA, GSA, VTG
20 GLL, RMC, VTG 25 RMC, GSA, VTG
DIGITAL MODE OPERATION
rPush [Y Y ] twice to select the position indication.
t Push [0•
] for 1 sec. to enter the position indication.
OPT
• Latitude and longitude date appear in order as below.
North or South Degrees
Push
Push
Seconds
yAfter checking the current position, push [✱•
]) to return to normal operating mode.
[D•
CLR
When set the sentence formatter at step e
IMPORTANT:
for connecting GPS receiver, and already programmed your
call sign, GPS automatic transmission is activate every 3
minutes. The automatic transmission can be changed inter-
val time or deactivated, if desired. (see the next page)
11
Minutes Seconds
Minutes East or West Degrees
] (or
ENT
11
55