Setting Daylight Savings Time - Cornelius VIPER 2 FLAVOR Service Manual

Setting Daylight Sav-
ings Time
© 2008-2012, IMI Cornelius Inc.
Step Action
1
Set date
2
Select month field
3
Set correct month
4
Select day field
5
Set correct day
6
Select year field
7
Set correct year
Once the date and time are set properly, daylight savings time settings can be
done. The Daylight Savings Time menu is shown in Figure 21. If daylight savings
time is off, press the + button to activate it. The button functions are described in
Table 13. To set daylight savings time, perform the procedure in Table 14.
NOTE: Default daylight savings settings are for the U.S.
CLOCK
SETUP
12:51P
MAR 04
BACK CLOCK DST ‐ +
Figure 21. Daylight Savings Setup Screen
Button
BACK Returns the display to the Select menu
CLOCK Opens the Clock menu
DST Highlighted to indicate DST menu
- Decrements the highlighted field by one increment
+ Increments the highlighted field by one increment
- 29 -
Table 12
Procedure
Use up and down arrows on the right side of the
control panel to highlight DATE display on screen.
Use the left and right arrows to select month field
Use the + or - buttons at the bottom of the display
to set the correct month.
Use the left and right arrows to select day field.
Use the + or - buttons at the bottom of the display
to set the correct day.
Use the left and right arrows to select year field.
Use the + or - buttons at the bottom of the display
to set the correct year.
DST: ON
SPRING MONTH: MAR
SPRING WEEK: 1
FALL MONTH: OCT
FALL WEEK: L
Table 13
Description
Publication Number: 621260373SER
Viper Service Manual