Setting Events; Setting The Sleep And Wakeup Times - Cornelius VIPER 2 FLAVOR Service Manual

Setting Events

Setting the Sleep and
Wakeup Times
© 2008-2012, IMI Cornelius Inc.
Button
BACK Returns the display to the Select menu and saves current settings
CLEAR Clears the highlighted field on the menu
- Decrements the highlighted field
+ Increments the highlighted field
When the sleep and wakeup settings and the defrost lockout settings are
complete, press the BACK button to save the settings and return to the Select
menu, shown in Figure 19.
Events setup allows the user to set sleep periods for the unit and to lock out the
defrost cycle during peak busy times. Sleep periods and defrost lockouts may be
programmed for individual days of the week or for all days of the week, depending
on location requirements.
Sleep and wakeup times are set on the Event Setup menu shown in Figure 22. To
set the sleep and wakeup times, perform the procedure in Table 16.
When the unit goes into a sleep period, the barrel automatically defrosts for four
minutes. Also, if a barrel is off when the sleep cycle starts, the barrel continues to
be in the off state when the sleep cycle ends. If a barrel is running when the sleep
cycle starts, the barrel starts back up when the sleep cycle ends.
Wakeup should be scheduled for approximately one hour before product is
required.
NOTE: Setting the sleep time after midnight requires you to set it during
the next day. (i.e. Saturday night at 1am must be set as 1am on Sunday,
etc.) If this type of setting is required, you cannot set another sleep cycle
during that following day, i.e. Sunday.
Step Action
Set sleep and wakeup
1
times
2
Select DAY
3
Set DAY
4
Select SLEEP
5
Set hour field
- 31 -
Viper Service Manual
Table 15
Description
Table 16
Procedure
Open the Events Setup menu, shown in Figure
22 by pressing the GO button.
The DAY field is highlighted.
Use the + or - buttons at the bottom of the dis-
play to set the desired day or all days.
Use the up and down arrows to highlight
SLEEP.
Use the left and right arrows to select the hour
field and press the + or - buttons to change the
hour.
Publication Number: 621260373SER