Viper Service Manual
Control Panel Display
Control Panel Buttons
Publication Number: 621260373SER
can be secured (locked out) so that an operator does not have access to them.
The control panel has a structured organization of menus. The outline of this
structure is shown in Figure 13. The Maintenance sub-menu is not visible when
the security feature is on.
The first menu that is displayed after the unit is powered up and stabilized is the
BARREL STATUS or HOME menu, shown in Figure 12. This menu is displayed
when the unit is running in normal operation.
The control panel display has two main areas. The first area is the menu display
area. This area presents information about the status and settings of the machine.
It also displays menus of actions that are taken to modify the functioning of the
machine.
Menu
Display
Area
MENU ON OFF DFRST SPIN
Figure 12. Control System Display
The second area are the buttons and arrows located across the bottom and on the
right side of the control panel. There are up to five buttons and four directional
arrows that may be used on a screen to activate and control various the functions
of the system. Each button that is active for a given menu has a label directly
above it. The label describes what that button controls. For example, from the
Barrel Status menu, pressing button 1 (labeled MENU) displays the Select menu
with more options — pressing button 3 (labeled OFF) turns off the highlighted
barrel.
On each menu below the Select menu, there is a button (labeled BACK) to save
any settings and return to the previous menu. There is another button (GO) to
advance to the highlighted menu.
- 20 -
#1 FREEZE 87
BARREL
#2 FREEZE 68
STATUS
12:51P
MAR 04
Menu Buttons
© 2008-2012, IMI Cornelius Inc.