Security - Cornelius VIPER 2 FLAVOR Service Manual

Security

© 2008-2012, IMI Cornelius Inc.
SYSTEM
12:51P
MAR 04
BACK
Display
# OF BARRELS
# OF COMPRESSORS
SECURITY
CMP #X SENSORS
Option
# of Barrels
# of Compressors
Security
Compressor Sensors NONE
System security is located on the System menu. It allows a supervisor or service
technician to keep unauthorized personnel from accessing the Maintenance
menu. This feature is activated on the System menu. When security is turned on,
users can only access the Main and Setup menus. The word LOCKED appears in
the upper left corner of the display to inform users that security is enabled.
Pressing the extreme Left and Right buttons (Buttons 1 and 5) on the bottom of
the display simultaneously and holding them for approximately five (5) seconds
unlocks the Security menu. If security is left ON on the System menu, when the
system times out or when the user goes back to the Main menu, security is re-
activated and the Maintenance menu is not accessable. To disable security,
access the System menu, highlight Security and press the OFF button.
- 45 -
# OF BARRELS 2
# OF COMPRESSOR 1
SECURITY OFF
CMP #1 SENSORS BOTH
CMP #X SENSORS LOW
Introduction
- +
A refrigeration system and an intelligent hot gas d
Figure 34. System Screen
Table 31
Description
This selection shows the number of barrels in the system
and allows the user to change the quantity.
This selection shows the number of compressors in the
sytem. Currently this number is fixed at one and cannot be
changed.
This selection allows the user to turn security on or off.
This selection allows the user to choose which pressure
sensors are read for the compressor.
Table 32
Button 2 Button 3
LOW
Publication Number: 621260373SER
Viper Service Manual
Button 4 Button 5
- +
- +
OFF ON
HIGH BOTH