Stx Kc Get Configuration - Datamax E-Class Mark II Programmer's Manual

STX KC Get Configuration
This command returns the configuration of the printer. The form of the returned data is
similar to that of a printed Configuration Label. This command should be parsed by
KEYWORDS, not character positions. Each line is terminated by a CR (0x0d) & LF
(0x0a).
Syntax:
Printer response:
CONFIGURATION
TUE 02:01PM 01AUG2005
PRINTER KEY:
4308-TB10-010327-494
APPLICATION VERSION:
83-2284-06E
06.06 07/09/2001
BOOT LOADER:
83-2269-03D 03.04 10/30/2000
SYSTEM INFORMATION
PRINT BUFFER SIZE:
280 in.
FLASH SIZE:
4 MB
RAM TEST:
PASS
OPTIONAL LANGUAGES:
FRANCAIS
ITALIANO
DEUTSCH
ESPAÑOL
CONFIGURATION FILE:
NONE
MEDIA SETTINGS
MEDIA TYPE
THERMAL TRANSFER
SENSOR TYPE
GAP
LABEL LENGTH
04.00 in.
MAXIMUM LABEL LENGTH
•30.00 in.
PAPER OUT DISTANCE
00.25 in.
LABEL WIDTH
4.16 in.
SENSOR CALIBRATION
PAPER SENSOR LEVEL
144
GAP SENSOR LEVEL
30
EMPTY SENSOR LEVEL
0

The format of the displayed information will vary with printer, model, firmware version,
and equipped options.
42
Extended System-Level Command Functions
<STX>KC<CR>
SENSOR GAIN
10
PRINT CONTROL
HEAT
10
PRINT SPEED
6.0in/sec
FEED SPEED
6.0in/sec
REVERSE SPEED
4.0in/sec
ROW OFFSET
00.00 in.
COLUMN OFFSET
00.00 in.
PRESENT DISTANCE
0.00 in.
CUSTOM ADJUSTMENTS:
DARKNESS
32
ROW ADJUST
64 DOTS
COLUMN ADJUST
0 DOTS
PRESENT ADJUST
64 DOTS
PRINTER OPTIONS
MODULES
A: NOT INSTALLED
B: NOT INSTALLED
D: FORMATTED
F: NOT INSTALLED
G: FORMATTED
X: FORMATTED
Y: 83-2296-01C
Z: NOT INSTALLED
PRESENT SENSOR
NOT INSTALLED
CUTTER
NOT INSTALLED
GPIO PORT:
NOT INSTALLED
SYSTEM SETTINGS
FACTORY SETTING FILE DATA BITS
NONE
INTERNAL MODULE STOP BITS
1024 KB
DEFAULT MODULE SERIAL PORT B:
D NOT INSTALLED
SCALEABLE FONT CACHE PARALLEL PORT A:
312 KB PORT DIRECTION
SINGLE BYTE SYMBOLS
PC-850 MULTILINGUAL PORT STATUS
DOUBLE BYTE SYMBOLS
UNICODE PARALLEL PORT B:
ABSOLUTE COUNTER PORT DIRECTION
3782 in.
27MAR2001 PORT STATUS
RESETTABLE COUNTER
205 in. NIC ADAPTER:
27MAR2001 DMXNET INACTIVE
FORMAT ATTRIBUTES HOST SETTINGS:
XOR HOST TIMEOUT
IMAGING MODE
MULTIPLE LABEL CONTROL CODES
PAUSE MODE
DISABLED FEEDBACK
SELECT SECURITY CHARACTERS
DISABLED
PEEL MODE ESC SEQUENCES
DISABLED
UNITS OF MEASURE HEAT COMMAND
IMPERIAL
SOP EMULATION SPEED COMMANDS
DISABLED
BACK AFTER PRINT DIAGNOSTICS
DISABLED HEX DUMP MODE
MENU LANGUAGE
ENGLISH PRINT TEST
COMMUNICATIONS RATE(min)
SERIAL PORT A:
BAUD RATE SENSOR READINGS
9600 BPS THR TRAN RIBM 24V
PROTOCOL 132
BOTH
PARITY 000 254
NONE RIBBON SENSOR
LIMITS
RIBBON ADC LOW
105
RIBBON ADC HIGH
182
END OF LIST
Class Series 2 Programmer's Manual
8
1
UNI-DIRECTIONAL
DISABLED
BI-DIRECTIONAL
DISABLED
10 SEC
STANDARD CODES
DISABLED
ENABLED
ENABLED
ENABLED
DISABLED
0
141 159 178
PS HD RANK
000